Crown Royal Stoves

Crown Royal StovesCrown Royal Outdoor Burning Stoves also known as boilers, furnaces or hydronic heaters are the least expensive and most economical way to heat in the winter months. Energy efficient with readily available renewable resources makes it the number one choice for many consumers. 

Crown Royal Outdoor Burning Stoves are made to be located outdoors near fuel storage, keeping the mess outside. Underground tubing is ran from the stove to the building(s). Virtually any existing heating system can be converted into heating with a Crown Royal Outdoor Burning Stove. 

The Crown Royal Pristine line consist of two models that use the newest technology called gasification, Gasification furnaces are designed to  achieve the highest efficiency ratings possible with extremely low emissions. The Crown Royal Pristine outdoor wood boilers are designed to burn dried wood and are able to be installed in areas with the strictest emission laws. The Crown Royal Pristine line are EPA Phase 2, white tag qualified and can be found listed in the EPA website for qualified hydronic heating systems. 

The traditional style Crown Royal Outdoor Coal Burning Stoves are available in four models equipped with shaker grates. The shaker grates make it easy to burn coal. With capabilities to heat multiple buildings, these four models range from 2,000 square feet to 20,000 square feet.

Crown Royal Stove Differences

  • 20 Year Limited Warranty - Some outdoor stove manufactures offer little to no warranty and are usually limited to 10 years. CROWN ROYAL offers a 20 year limited warranty on ALL stoves we manufacture.
  • TYPE 409 STAINLESS STEEL – 409 10 gauge stainless steel is superior to mild steel and others stainless steel grades in terms of thermal expansion properties, along with better corrosion resistance than mild steel. Competitors using mild steel need at least 3/8” or ½” to get the same corrosion control and by doing that lose heat transfer efficiency. 
  • FULLY ENCLOSED OUTDOOR STOVES - All Crown Royal outdoor stoves are fully enclosed. Many manufacturers do not have floors which results in rodents and other animal problems that will damage the stove, wiring, and R Value of the furnace. ***Excludes Indoor Units
  • RESEARCH, DEVELOPMENT, AND TESTING - What better location to develop and test an outdoor stove than International Falls, Minnesota, with the coldest temperatures in the continental United States. All Crown Royal Stoves undergo a 24 hour pressure test after final assembly, before shipment. All manufacturing is performed at our International Falls, Minnesota plant. 
  • EPA APPROVED OUTDOOR STOVES - Along with our complete line of traditional models, Crown Royal has also developed and sells EPA qualified units that fall far below the EPA requirements for smoke emission standards. Currently we have three models to choose from.
  • INDOOR UNITS - Our indoor units are made with the same high quality standards as our traditional models, but give end users the option to put them inside a garage or barn
  • MADE IN THE USA – Crown Royal Stoves and our line of unit heaters and air handlers are fully manufactured at our plant in International Falls, Minnesota. All of our steel comes from mills in the United States.
Crown Royal Advantages
Crown Royal Stoves are designed to be very user friendly & easy to maintain. They have the “ORIGINAL” Shaker Grate System, easy ash removal, pull out ash pan, easy access rear door for seamless installation and maintenance, large firebox door for easy loading of fuel, and heat transfer tubes for more square feet of heating capacity. The stoves are also equipped with a turbo draft system equipped with two blowers – primary and secondary. This system provides the following advantages: burns secondary gases, burns a hotter fire, provides much more heat transfer, higher efficiency, burns less wood, faster heat recovery, less ashes and low smoke emissions. With all of the advantages we have the best performing, highest quality stove on the market!