|  Specializing in converting hydronic heat to fan forced air heat,
Precision Metal Products means quality and comfort in hot water air
handlers and unit heaters. HVAC technicians appreciate equipment that is
designed for performance & flexibility and our air handlers and
unit heaters offer both.
Are you involved with the plumbing, or heating and
air conditioning industry? Are you an electrical contractor that sells
and installs commercial or residential hot water systems? Then this is
the site for you. Whether you are installing a new boiler system or
upgrading an old system, if you need to convert that hot water heat to
fan forced air heat, then you definitely need a Precision Metal Products
air handler or unit heater.
Air Handlers & Unit Heaters Applications Include:
- Adding extra heat to cold areas
- Converting hot water into fan forced air
- Quick recovery systems for use with in-floor radiant heating systems
- Distribute heat to multiple levels, or dwellings, using a single boiler system
- Converting hot water heat to fan forced air from outdoor wood furnaces
These are just a few of the many applications our air handlers
& unit heaters are used for. With many sizes and options to choose
from, we're sure to have one to fit your needs.  Unit Heaters
Built for quality and performance, our unit heaters offer better
performance, heavier gauge construction, and increased installation
flexibility, all in a nicer looking package. Equipped with variable
speed motors ( excluding UH-18 ) the unit heaters give you the ability
to fine tune the balances between performance and efficiency.
These heaters are another excellent way to convert your hot water
to forced air heat. Our unit heaters also work excellent in combination
with hot water in-floor heat. This combination gives you the comfort of
in-floor heat as well as the quick recovery of forced air all from the
same heating system.
All our unit heaters can be easily converted from a right hand
water supply to a left hand water supply. Each unit heater is designed
to be used with a 110 volt thermostat.
Thermostat and speed control sold separately.
| Models |
BTU EWT 200° |
BTU EWT 180° |
CFM Blower Speed |
Water Lines |
HP |
Shipping Weight |
| UH-18 |
19,732 |
16,881 |
180 - 1.4 |
1" |
1/30 |
30 Lbs |
| UH-60 |
64,923 |
55,506 |
700 - 1.4 |
1" |
1/30 |
53 Lbs |
| UH-95 |
102,058 |
87,243 |
935 -1.6 |
1" |
1/20 |
69 Lbs |
| UH-140 |
158,184 |
135,066 |
1,770 - 3.9 |
1" |
1/4 |
85 Lbs |
| UH-190 |
206,831 |
176,585 |
2,278 - 4.9 |
1" |
1/4 |
100 Lbs |
| UH-225 |
244,239 |
208,638 |
2,690 - 4.1 |
1" |
1/4 |
112 Lbs |
 Air Handlers
Our air handlers are designed for performance & reliability and
are an excellent choice for converting hot water to forced air heat.
These air handlers also perform well with forced air add-ons such as
central air conditioners, electronic air cleaners and humidifiers etc.
Our air handlers can be installed in a up flow, down flow or horizontal
air flow position, offering ultimate flexibility.
Air Handler Features :
- 4 Speed Direct Drive Blowers ( 3 speeds on AH-70 )
- Capacitor run motors with sealed bearings
- 24 Volt Controls ( Pre-wired )
- Painted Exterior ( Gray semi gloss )
- Filter
- Filter Rack
| Models |
BTU EWT 200° |
BTU EWT 180° |
CFM Blower Speed |
Water Lines |
HP |
Shipping Weight |
| AH-70 |
77,728 |
65,958 |
768-L |
1" |
1/4 |
105 Lbs |
| AH-95 |
106,241 |
90,014 |
1,158-L |
1" |
1/3 |
105 Lbs |
| AH-115 |
126,023 |
106,850 |
1,467-M |
1" |
1/2 |
129 Lbs |
| AH-135 |
151,856 |
128,753 |
1,691-H |
1" |
1/2 |
131 Lbs |
| AH-150 |
160,813 |
136,344 |
1,769-H |
1" |
1/2 |
133 Lbs |
| AH-195 |
212,413 |
179,974 |
2,500-H |
1" |
3/4 |
169 Lbs |
| AH-220 |
233,373 |
197,884 |
2,498-H |
1" |
3/4 |
172 Lbs
|
Download Area
 Precision Metal Unit Heater Brochure
Precision Metal Air Handler Brochure
Learn More about Precision Metal Products - Air Handlers and Unit Heaters |
