INCREASE THE EFFIEIENCY OF YOUR OUTDOOR FURNACE INSTALLTION WITH INSUL-SEAL
Over the years the outdoor wood burning furnaces have proven to be a safe, economical and a versatile means of providing heat. Through the latest in design and engineering, manufacturers continue to increase the efficiency of these units. Whether for forced air, in floor radiant, or other systems, these furnaces are very adaptable and efficient.
Insul-Seal / InsulSeal is proud to be a component that increases the efficiency of the installation of outdoor furnaces. Insul-Seal also helps keep the heating plant a distance away from the house or other building to be heated. This separation eliminates the wood mess sometimes associated with indoor wood burning units. By distancing the combustion unit from the house, the safety concerns associated with wood burning units are also removed. This makes this type of heat well received by insurance companies.
By using Insul-Seal / InsulSeal insulated PVC pipe as a conduit for the hot water and return lines to and from the outdoor furnaces, heat loss between the furnace and the heat exchangers at the areas to be heated has been virtually eliminated.
On a typical 80' - 100' run between the furnace & house water temp can be within 3° of furnace's temp as it enters the heat exchanger at the house. This translates into less wood to be burned, and less times to load the furnace. An already efficient heat source is made even more economical.
INSULATED PVC CAN SIGNIFICANTLY EXTEND THE TIME TO FREEZE
- All data compiled by Dickson Model Ktx Remote Temperature Recorder.
- Initial water temperature at 75° F. Test conducted at -13° F ambient temp ± 3°
- Connects septic tanks under driveways (helps prevent deflection).
- Sewer lines where digging is not practical due to rock or caving conditions.
- Insulated PVC for water lines to run from one building to another
(an application that allows you to "pull" problem pipes without digging up lines). - Water / sewer connections for mobile homes.
- City water / sewer connections
- Connect hot water lines from outdoor boilers to home
- Delivery system for discharge of effluent from livestock confinement and milkhouse waste to lagoon site.
- Prevents freezeup of lines under driveways, roads, trails and areas travelled over or bare in winter.
- Opens up building sites previously unusable due to topography.
- Deadens pipe noise in apartments, townhomes, and condominiums.
- Distribution of chilled water for air conditioning
| Inside Diameter | Schedule of PVC Pipe | R-Value of Foam | Hours to Freeze |
| ¾" | 40 | 0 | 2.25 hrs |
| ¾" | 40 | 19 | 23 hrs |
| 1½ | 40 | 0 | 3 hrs |
| 1" | 40 | 17 | 37 hrs |
| 1¾" | 40 | 0 | 4.5 hrs |
| 1¾" | 40 | 15 | 60 hrs |
| 2" | 40" | 0 | 5 hrs |
| 2" | 40 | 13 | 68 hrs |
| 2" | 40 (Zone D) | 21 | 93 hrs |
| 3" | 40 | 0 | 13 hrs |
| 3" | 40 | 17 | 121 hrs |
| 4" | SDR 35 | 0 | 17 hrs |
| 4" | SDR 35 | 6 | 94 hrs |
| 4" | SDR 35 | 15 | 158 hrs |
| 4" | SDR 35 (Zone D) |
22 | 222 hrs |
| 6" | SDR 35 | 0 | 27 hrs |
| 6" | SDR 35" | 14 | 286 hrs |
• All Pipe is 10' Bell End Solvent Weld | •• All Tees are Hub x Hub x Hub
••• Elbows are Hub x Spigot | All Pipe is sold per ft.
| Description | Order Number |
| 3" Insul-Seal Pipe | Insul-Seal3 |
| 3" Insul-Seal 45 Degree Elbow | I45-3 |
| 3" Insul-Seal 90 Degree Elbow | I90-3 |
| 3" Insul-Seal 22.5 Degree Elbow | I-22-3 |
| 4" Insul-Seal Pipe per ft | Insul-Seal4 |
| 4" Insul-Seal 45 Degree Elbow | I45-4 |
| 4" Insul-Seal 90 Degree Elbow | I90-4 |
| 4" Insul-Seal Tee | I-Tee |
| 4" Insul-Seal Wye | I-Wye |
| 6" Insul-Seal Pipe | Insul-Seal6 |
| 6" Insul-Seal 45 Degree Elbow | I45-6 |
| 6" Insul-Seal 90 Degree Elbow | I90-6 |
For pricing or placing orders, please call 1-866-361-7355 or e-mail us.